What is the difference between front lit and halo lit letters?
Front lit letters push light through the face so the color glows. Halo lit letters glow backward against the wall, creating an outline effect. Combination sets use both across one sign.
Serving Wichita and up to 100 miles · Mon–Fri, 9 AM–5 PM

Sign making · Wichita, Kansas
Channel letters fabricated in our shop and installed by our crew, front lit, halo lit or open face. Channel letters are the sign that most defines a storefront, and the difference between a good set and a bad one is rarely the logo. It is the return depth, the trim cap, the way the light falls and the mounting behind it. 5K Signs fabricates channel letters and installs them, which means the shop that builds the letters also sees how they land on the wall.
5K Signs · 2610 S. Seneca St., Wichita, KS 67217 · Mon–Fri, 9 AM–5 PM
Channel letters are individual dimensional letters, each with its own return, face and internal light source, wired together and mounted as a set. Front lit letters push light through the face so the brand color glows. Halo lit letters glow backward against the wall, which produces a softer outline and puts the light where the wall can reflect it. Open face letters leave the light source visible or covered by a clear face, which gives a different look and needs a different conversation about glare and access. Combination sets mix the three across one sign for a layered brand effect.
Retail and restaurant tenants establishing a storefront identity, franchise operators building to a brand standard, property managers replacing worn letters on a center, and national sign companies that need a fabricator and installer in the region. Brand standards are common in franchise work, and they usually specify return depth, face color, illumination type and letter spacing. When a brand package exists, we build to it. When it does not, we work from the logo and the site to propose a set that suits the building, and we are direct about which details the brand owner needs to approve.
Fabrication starts with the letter shapes, taken from vector artwork so the geometry is exact. Returns are formed to the outline and sized to the illumination and the look, since depth affects both the light and the visual weight. Faces are produced to fit the return with a trim cap that frames the letter and holds the face in place. Finish follows the design, and painted or colored returns are matched to the brand. Letter spacing, stroke width and small counters all need a review before cutting, because a thin script stroke at eight inches tall behaves differently than the same logo on a business card.
Each letter carries its own lighting, and the set is wired to a power supply sized for the load. Spacing of the light modules inside the letter, the depth of the return and the diffusing quality of the face determine whether the glow is even or blotchy. Halo lit sets need particular attention to setback from the wall so the halo reads as a ring rather than a smear. Where letters are mounted on a raceway, the wiring collects in one place and the electrical connection is simplified. Where they are flush mounted, wiring runs through the wall, and that is a site condition to confirm before fabrication is released.
Both mounting methods are fabricated to suit the site. A raceway is a finished aluminum box that carries the letters and collects the wiring, which makes future service easier and keeps the wall cleaner where penetrations would be undesirable. Flush mounting attaches each letter individually to the facade, producing a tighter look but requiring a pattern, individual penetrations and a plan for wiring behind the wall. The building decides as much as the design does: masonry, EIFS, metal panel and storefront systems all accept attachments differently. We confirm the wall construction before the build is released.
Letter performance varies with construction, mounting, sealing, faces and lighting components. Ask us about the products selected for your project.
Share the opening date, artwork status, approvals and site details so we can confirm fabrication timing and any available rush option.
Pricing depends on letter size and complexity, quantity, illumination, finish, mounting and access. The quote identifies the selected construction and mounting options.
Send clean vector artwork, the site dimensions and brand standards. We confirm design, engineering, permit-support and file-preparation scope before fabrication.
Property managers, contractors and national sign companies can share drawings, locations and opening dates for an account quote. Any trade terms or order minimums are discussed when we review the requested scope.



Front lit letters push light through the face so the color glows. Halo lit letters glow backward against the wall, creating an outline effect. Combination sets use both across one sign.
Yes. Letter shapes are cut from vector paths, so a clean vector file is required. If you only have a flat image, it has to be redrawn, and whether that is included depends on the project.
Yes, flush mounting attaches each letter individually to the wall. It requires a pattern, wall penetrations and a wiring plan, so the wall construction has to be confirmed first.
Yes. Our crew sets the pattern, mounts the letters, makes the scoped electrical connection and checks illumination before leaving.
Letter height depends on the storefront, the viewing distance, the brand standard and the building's rules. Send the facade photo and dimensions and we can discuss proportions.
Quote request
Share dimensions, quantity, artwork and needed-by date. Artwork files are not sent through this form; email them to 5Ksigns316@gmail.com after your request.
(316) 617-7064